Mosquito Magnet Forum

i have an old pro i just got from my brother. i have always done the matn. on it. have always cleaned it out and used the co2 to purge the lines. worked great for about 3 years last year not so good and this year not at all. it will stay runnin if i hold down the primer but will heat up way too much. looks like the fan isnt working either. i have read posts and most look like they are talking about newer models. mine has no battery or led lights. i took it apart and cleaned everything i could think of including the thermo coupler. one post was talking about replacing 3 tec's. but that one used battery. is mine the same, sound the same? any help out there would be great..

The PRO-C 1000MM uses 3 TEC Chips similar to the other models (part num: 12711-9L31-05CL from CustomThermoElectrics.com) was indicated to work (although I have three on order now), the TEC's are located on the backside of the large heatsink (between the heatsink and the burner). While I do NOT consider myself an expert it seems the key on the TEC's is the size, output and ability to tolerate the heat.